If you have had problems with plantation shutters, then you know how frustrating they can be. Plantation shutters are easy to install, but problems arise from time to time when they aren’t doing what they should. Because they are usually made of wood, they don’t always lay the way you expect them to. If the shutter needs to be adjusted or opened, then it often results in something more than you expected. When this happens, it can be frustrating to figure out the right way to fix the problem. But Peth Timber Shutters provides the best plantation shutters and also provides best services if any problem occurs.

Blind Installation Service Albuquerque| Handyman Services of Albuquerque

The most common problem with plantation shutters is that they don’t close all the way. Eventually, the gaps between the shutters will start to open. This is a fairly common issue, and luckily, a fix is quite easy. A little screwdriver is needed to tighten the shutters back in place, using multiple sequences if necessary.

First, open your window shutters and locate the screws underneath each window. You’ll need two or three of them for the window shutters, depending on the number of windows. Pull out the long screws and insert a screwdriver under each of the long nails to brace them. Then, take a pair of stainless steel staples and place them on the inside and outside of each nail, being careful to not allow any extra leverage to damage the shutters. Repeat this process for the remaining nails.

The problem with plantation shutters is that the wood itself is very weak. Each individual wood shutter has small gaps between the boards, which allow the wind to pass through the house. As the wood starts to weaken, it is more likely to bend in on itself, which can weaken the integrity even further. This can cause your window shutters to start buckling or actually fall down on their own. If they fall down on their own, you have a few options.

The first option is to fill the gaps with wood shims, giving the shutters a thicker layer of insulation against the cold. This is a great solution, but it can actually make your house look worse. Over time, you will be keeping yourself awake because there will be small gaps all over your house, making your home look unsightly.

The second option is to actually replace the entire shutters. The best way to go about doing this is to first find a good stairstep break that is made specifically for your window shutters. By installing stairstep break panels on each of your shutters, you can significantly increase the strength of your whole shutter system. This will make the entire house sturdier and less apt to be broken into, saving you money in the long run. If you are having problems with plantation shutters, investing in stairstep break panels is definitely the best solution.